A problem with your plumbing can happen anytime. If it does, you need to know what to do about it. It is possible for you to take care of many of these problems on your own. Here are some helpful tips to teach you how to handle plumbing problems yourself.
To help you find a good plumber, you should get recommendations from people whom you trust. Asking a friend or a neighbor is usually more trustworthy than picking a random plumber out of the phone book. You need a competent plumber, otherwise you could be in for a much bigger problem down the road.
It is important to know how to properly anchor your pipes when it comes to plumbing. This is extremely important to know because not having your pipes well anchored could result in loud noises, leaks, or pressure problems. Call a professional if you are unsure how to take care of it yourself.
Be careful about using liquid clog cleaners. These liquids can contain chemicals that are extremely bad for your pipes. Instead, use a snake or a plunger to dislodge any clogs you might encounter. Be sure to try these things before giving up and calling a plumber, who will probably re-perform those same acts.
Find a better way to discard of cooking oil instead of pouring it down the drain where it can easily clog your pipes. Keep a coffee can or other metal container handy to pour grease into after cooking. Place the can in the freezer to harden the grease and when it’s full, discard it with the trash.
Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.
Some people have problems with their plumbing system in that the pipes sweat and drip condensation. You do not have to hire a plumber to take care of this nuisance. You can purchase self-adhesive drip tape from your local hardware store. This drip tape will insulate your “sweating” pipes which are dripping with moisture built up from condensation. To make sure the tape sticks firmly, dry the pipe thoroughly before applying the tape.
When you have a plumbing problem that comes up in your home, you do not necessarily have to pay a plumber a lot of money to come out and fix it for you. The helpful points you learned in this article will enable you to care for basic plumbing maintenance and repairs around your home yourself.